A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

Identifying aspirin polymorphs from combined DFT-based crystal structure prediction and solid-state NMR

A combined experimental and computational approach was used to distinguish between different polymorphs of the pharmaceutical drug aspirin. This method involves the use of ab initio random structure searching (AIRSS), a density functional theory (DFT)-based crystal structure prediction method for the high-accuracy prediction of polymorphic structures, with DFT calculations of nuclear magnetic resonance (NMR) parameters and solid-state NMR experiments at natural abundance. AIRSS was used to predict the crystal structures of form-I and form-II of aspirin. The root-mean-square deviation between experimental and calculated ¹H chemical shifts was used to identify form-I as the polymorph present in the experimental sample, the selection being successful despite the large similarities between the molecular environments in the crystals of the two polymorphs.     

What is the form of muscimol from fly agaric mushroom (Amanita muscaria) in water? An insight from NMR experiment supported by molecular modeling

The biologically active alkaloid muscimol is present in fly agaric mushroom (Amanita muscaria), and its structure and action is related to human neurotransmitter _γ-aminobutyric acid (GABA). The current study reports on determination of muscimol form present in water solution using multinuclear ¹H and ¹³C nuclear magnetic resonance (NMR) experiments supported by density functional theory molecular modeling. The structures of three forms of free muscimol molecule both in the gas phase and in the presence of water solvent, modeled by polarized continuous model, and nuclear magnetic isotropic shieldings, the corresponding chemical shifts, and indirect spin–spin coupling constants were calculated. Several J-couplings observed in proton and carbon NMR spectra, not available before, are reported. The obtained experimental spectra, supported by theoretical calculations, favor the zwitterion form of muscimol in water. This structure differs from NH isomer, previously determined in dimethyl sulfoxide (DMSO) solution. In addition, positions of signals C3 and C5 are reversed in both solvents.     

A DNA Switch for Detecting Single Nucleotide Polymorphism within a Long DNA Sequence Under Denaturing Conditions

DNA detection is usually conducted under nondenaturing conditions to favor the formation of Watson–Crick base-paring interactions. However, although such a setting is excellent for distinguishing a single-nucleotide polymorphism (SNP) within short DNA sequences (15–25 nucleotides), it does not offer a good solution to SNP detection within much longer sequences. Here we report on a new detection method capable of detecting SNP in a DNA sequence containing 35–90 nucleotides. This is achieved through incorporating into the recognition DNA sequence a previously discovered DNA molecule that forms a stable G-quadruplex in the presence of 7 molar urea, a known condition for denaturing DNA structures. The systems are configured to produce both colorimetric and fluorescent signals upon target binding.     

Molecular Acceptors Based on a Triarylborane Core Unit for Organic Solar Cells

Triarylboranes that exhibit p–π* conjugation serve as versatile building blocks to design n-type organic/polymer semiconductors. A series of new molecular acceptors based on triarylborane is reported here. These molecules are designed with a boron atom that bears a bulky 2,4,6-tri-tert-butylphenyl (Mes*) substituent at the core and strong electron-withdrawing 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC) units as the end-capping groups that are linked to the core by bithiophene bridges. Butyl or butoxy groups are introduced to the bithiophene units to tune the optoelectronic properties. These molecules show nearly planar backbones with highly localized steric hindrance at the core, low LUMO/HOMO energy levels, and broad absorption bands spanning the visible region, which are all very desirable characteristics for use as electron acceptors in organic solar cell (OSC) applications. The attachment of butyl groups to the bithiophene bridges brings about a slightly twisted backbone, which in turn promotes good solubility and homogeneous donor/acceptor blend morphology, whereas the introduction of butoxy groups leads to improved planarity, favorable stacking in the film state, and a greatly reduced band gap. OSC devices based on these molecules exhibit encouraging photovoltaic performances with power conversion efficiencies reaching up to 4.07 %. These results further substantiate the strong potential of triarylboranes as the core unit of small molecule acceptors for OSC applications.     

Enhanced Sensitivity to Local Dynamics in Peptides by Use of Temperature-Jump IR Spectroscopy and Isotope Labeling

Site-specific isotopic labeling of molecules is a widely used approach in IR spectroscopy to resolve local contributions to vibrational modes. The induced frequency shift of the corresponding IR band depends on the substituted masses, as well as on hydrogen bonding and vibrational coupling. The impact of these different factors was analyzed with a designed three-stranded β-sheet peptide and by use of selected ¹³C isotope substitutions at multiple positions in the peptide backbone. Single-strand labels give rise to isotopically shifted bands at different frequencies, depending on the specific sites; this demonstrates sensitivity to the local environment. Cross-strand double- and triple-labeled peptides exhibited two resolved bands that could be uniquely assigned to specific residues, the equilibrium IR spectra of which indicated only weak local-mode coupling. Temperature-jump IR laser spectroscopy was applied to monitor structural dynamics and revealed an impressive enhancement of the isotope sensitivity to both local positions and coupling between them, relative to that of equilibrium FTIR spectroscopy. Site-specific relaxation rates were altered upon the introduction of additional cross-strand isotopes. Likewise, the rates for the global β-sheet dynamics were affected in a manner dependent on the distinct relaxation behavior of the labeled oscillator. This study reveals that isotope labels provide not only local structural probes, but rather sense the dynamic complexity of the molecular environment.     

Ring-Opened Hemiporphyrazines: Helical Molecules Exhibiting Circularly Polarized Luminescence

We designed and synthesized a new type of small helical molecule exhibiting intense circularly polarized luminescence (CPL) ( 1_2H ) by modifying a 20π-electron hemiporphyrazine with a large transition magnetic dipole moment. The hemiporphyrazine ring was opened and one additional pyridine unit was introduced, resulting in an overlap of two pyridine rings. X-ray structure analysis confirmed that 1_2H and its zinc complex ( 1_Zn ) adopt a helical geometry. A racemic mixture of 1_Zn was resolved into two enantiomers ((P)- and (M)- 1_Zn ), which exhibited CPL with a high luminescence dissymmetry factor (g_lum) value of ±2.1×10⁻². The origin of the large g_lum value was rationalized by means of DFT calculations. Helical structures could be formed in a diastereoselective manner by covalently attaching chiral units to the skeleton ( 1’_2H and 1’_Zn ). 1_Zn was found to possess chiral recognition ability for amines.     

Two Rare-Earth Molecular Ferroelectrics with High Curie Temperatures,Large Spontaneous Polarization,Switchable Second Harmonic Generation Effects,and Strong Photoluminescence

Smart multifunctional molecular ferroelectrics bearing high Curie temperatures and diverse excellent physical properties, such as second harmonic generation (SHG) responses, luminescence, and semiconductivity, among others, have significant applications but have seldom been documented. Herein, the rare-earth metals Nd and Pr are introduced into a simple molecular system (nBu₄N )₃[M(NO₃)_x(SCN)_y] (nBu₄N₌tetrabutyl ammonium, M=rare-earth metal, nBu=CH₃CH₂CH₂CH₂), and two new multifunctional molecular ferroelectrics are obtained: (nBu₄N )₃[Nd(NO₃)₄(SCN)₂] ( 1 ) and (nBu₄N )₃[Pr(NO₃)₄(SCN)₂] ( 2 ). Their distinct heat and dielectric anomaly dependence on temperature verifies that compounds 1 and 2 experience high-temperature para-ferroelectric phase transitions at 408 and 413 K, respectively. Strikingly, both molecular ferroelectrics possess large spontaneous polarization with P_s values of 9.05 and 8.50 μC cm⁻², respectively, and are further characterized by the appearance of multiple intersecting non-180° domains and polarization switching behavior. In particular, compounds 1 and 2 show good stability with only a small decrease in SHG intensity after switching cycles, suggesting that they have great potential for application in nonlinear optical (NLO) switches. Simultaneously, the rare-earth compounds 1 and 2 present bright yellow–red and bright green fluorescence, respectively, at room temperature.     

Supramolecular Assemblies for Electronic Materials

This work presents a synergy between organic electronics and supramolecular chemistry, in which a host–guest complex is designed to function as an efficacious electronic material. Specifically, the noncovalent recognition of a fullerene, phenyl-C₆₁-butyric acid methyl ester ( PC₆₁BM ), by an alternating perylene diimide ( P )-bithiophene ( B ) conjugated macrocycle ( PBPB ) results in a greater than five-fold enhancement in electron mobility, relative to the macrocycle alone. Characterization and quantification of the binding of fullerenes by host PBPB is provided alongside evidence for intermolecular electronic communication within the host–guest complexes.